RCPlanet
TRAXXAS PRO .15 WITH PULL START WITH LONG SHAFT TRA4009
| Mount holes (center to center) | left to right |
| Mount holes (center to center) | front to back |
, Overall Length (front end of shaft to back of starter):, 92mm (3-5/8"), Height (top of cylinder head to bottom of backplate):, 93mm (3-5/8"), Width (cylinder head):, 41mm (1-1/2"), 31mm (1-1/4"), 11mm (7/16"), Overall width of mounting ears (where the holes are):, 40mm (1-9/16"), ,
Traxxas pro .15 w/pull start with long shaft is a ...Hobby-Lobby
TP610C-AC/DC LIPO CHARGER
| Battery Type | LiIon/LiPo/LiFe/NiCd/NiMH/Pb |
| Charge Rate | Adjustable from 0.1 to 10 amps in 0.05 increments |
| Discharge | Adjustable current rates and voltage cutoffs for LiPo/LiIon/LiFe (A123) cells |
| Input | AC/DC |
| Number of Cells | 1 - 14 Ni-MH 1-6 Li-Po |
| Output Connector | Banana |
| Peak | Adjustable Delta peak values for NiCd/NiMH charging |
| Power Input | 12V DC |
| Type | AC/DC Charger |
Features:, Unique all-in-one charger, discharger and cycler with built-in LiPo/LiIon/LiFe (A123) cell balancer, Technical Specifications:,
TP610C-AC/DC Lipo Charger The Thunder Power RC TP610C-ACDC charger is ...Hobby-Lobby
TP610C-AC/DC LIPO CHARGER
| Battery Type | LiIon/LiPo/LiFe/NiCd/NiMH/Pb |
| Charge Rate | Adjustable from 0.1 to 10 amps in 0.05 increments |
| Discharge | Adjustable current rates and voltage cutoffs for LiPo/LiIon/LiFe (A123) cells |
| Input | AC/DC |
| Number of Cells | 1 - 14 Ni-MH 1-6 Li-Po |
| Output Connector | Banana |
| Peak | Adjustable Delta peak values for NiCd/NiMH charging |
| Power Input | 12V DC |
| Type | AC/DC Charger |
Features:, Unique all-in-one charger, discharger and cycler with built-in LiPo/LiIon/LiFe (A123) cell balancer, Technical Specifications:,
TP610C-AC/DC Lipo Charger The Thunder Power RC TP610C-ACDC charger is ...Hobby-Lobby
TP610C-AC/DC LIPO CHARGER
| Battery Type | LiIon/LiPo/LiFe/NiCd/NiMH/Pb |
| Charge Rate | Adjustable from 0.1 to 10 amps in 0.05 increments |
| Discharge | Adjustable current rates and voltage cutoffs for LiPo/LiIon/LiFe (A123) cells |
| Input | AC/DC |
| Number of Cells | 1 - 14 Ni-MH 1-6 Li-Po |
| Output Connector | Banana |
| Peak | Adjustable Delta peak values for NiCd/NiMH charging |
| Power Input | 12V DC |
| Type | AC/DC Charger |
Features:, Unique all-in-one charger, discharger and cycler with built-in LiPo/LiIon/LiFe (A123) cell balancer, Technical Specifications:,
TP610C-AC/DC Lipo Charger The Thunder Power RC TP610C-ACDC charger is ...Hobby-Lobby
TP610C-AC/DC LIPO CHARGER
| Battery Type | LiIon/LiPo/LiFe/NiCd/NiMH/Pb |
| Charge Rate | Adjustable from 0.1 to 10 amps in 0.05 increments |
| Discharge | Adjustable current rates and voltage cutoffs for LiPo/LiIon/LiFe (A123) cells |
| Input | AC/DC |
| Number of Cells | 1 - 14 Ni-MH 1-6 Li-Po |
| Output Connector | Banana |
| Peak | Adjustable Delta peak values for NiCd/NiMH charging |
| Power Input | 12V DC |
| Type | AC/DC Charger |
Features:, Unique all-in-one charger, discharger and cycler with built-in LiPo/LiIon/LiFe (A123) cell balancer, Technical Specifications:,
TP610C-AC/DC Lipo Charger The Thunder Power RC TP610C-ACDC charger is ...Hobby-Lobby
TP610C-AC/DC LIPO CHARGER
| Battery Type | LiIon/LiPo/LiFe/NiCd/NiMH/Pb |
| Charge Rate | Adjustable from 0.1 to 10 amps in 0.05 increments |
| Discharge | Adjustable current rates and voltage cutoffs for LiPo/LiIon/LiFe (A123) cells |
| Input | AC/DC |
| Number of Cells | 1 - 14 Ni-MH 1-6 Li-Po |
| Output Connector | Banana |
| Peak | Adjustable Delta peak values for NiCd/NiMH charging |
| Power Input | 12V DC |
| Type | AC/DC Charger |
Features:, Unique all-in-one charger, discharger and cycler with built-in LiPo/LiIon/LiFe (A123) cell balancer, Technical Specifications:,
TP610C-AC/DC Lipo Charger The Thunder Power RC TP610C-ACDC charger is ...Hobby-Lobby
1350MAH 2S 7.4V 25C G6LITE
,
1350mAh 2S 7.4V 25C G6Lite The TP1350-2SPL25J is a 1350mAh ...Hobby-Lobby
AX10 RIDGECREST 1/10 ELECTRIC 4WD RTR
| Wheelbase | 307mm (12.1") |
| Width | 295.3mm (11.6") |
| Height | 238mm (9.38") |
| Ground Clearance | 76.2mm (3") |
Technical Specifications:,
AX10 Ridgecrest 1/10 Electric 4WD RTR The original AX10™ Scorpion ...Hobby-Lobby
1/18 MINI-DESERT TRUCK RTR: RED
| 1/18 Mini-Desert Truck RTR | Red |
| Ball Bearings | Complete Transmission |
| Batteries | 7.2V (4 x 2) Battery Pack (vehicle) and 8 AA Dry Cells (transmitter) |
| Body | Custom-painted and -stickered (available in Red, Blue or Green) |
| Charger | AC Wall Charger Included |
| Chassis | Molded Composite |
| Drivetrain | 2WD |
| Length | 9.875 in (250.83mm) |
| Motor or Engine | Mini-280 Electric |
| Radio | Losi 27MHz AM System |
| Servos | 3-wire Digital |
| Shock Type | Composite coil-over oil-filled |
| Size/Scale | 1/18 |
| Speed Control | Losi MRX-R14 with Forward and Reverse |
| Suspension | 4-Wheel Independent |
| Tire Type | All-Terrain Truck |
| Type | Ready-To-Run Electric Off-Road Truck |
| Weight | 1.26 lb (571 g) |
| Wheelbase | 6.44 in (163.58mm) |
| Width | 7 in (177.8mm) |
Key Features:, The 1/18-scale Mini-Desert Truck comes ready-to-run with everything included, Technical Specifications:,
Losi® 1/18-scale Mini-Desert Truck RTR offers a variety of performance-packed ...Hobby-Lobby
1/18 MINI-DESERT TRUCK RTR: BLUE
| 1/18 Mini-Desert Truck RTR | Blue |
| Ball Bearings | Complete Transmission |
| Batteries | 7.2V (4 x 2) Battery Pack (vehicle) and 8 AA Dry Cells (transmitter) |
| Body | Custom-painted and -stickered (available in Red, Blue or Green) |
| Charger | AC Wall Charger Included |
| Chassis | Molded Composite |
| Drivetrain | 2WD |
| Length | 9.875 in (250.83mm) |
| Motor or Engine | Mini-280 Electric |
| Radio | Losi 27MHz AM System |
| Servos | 3-wire Digital |
| Shock Type | Composite coil-over oil-filled |
| Size/Scale | 1/18 |
| Speed Control | Losi MRX-R14 with Forward and Reverse |
| Suspension | 4-Wheel Independent |
| Tire Type | All-Terrain Truck |
| Type | Ready-To-Run Electric Off-Road Truck |
| Weight | 1.26 lb (571 g) |
| Wheelbase | 6.44 in (163.58mm) |
| Width | 7 in (177.8mm) |
Key Features:, The 1/18-scale Mini-Desert Truck comes ready-to-run with everything included, Technical Specifications:,
Losi® 1/18-scale Mini-Desert Truck RTR offers a variety of performance-packed ...Hobby-Lobby
UMX BEAST 3D BNF BASIC WITH AS3X TECHNOLOGY
| Low | 70%, 0% expo; High |
| Low | 70%, 0% expo; High |
| Low | 70%, 0% expo; High |
UMX Beast 3D Highlights:, AS3X System for outstanding precision and 3D flight, Technical Specifications:, Wingspan:, 14.7 in (374mm), Overall Length:, 15.7 in (400mm), Wing Area:, 83.8 sq. in. (54.2 sq. dm.), Flying Weight:, 2.54 oz (72 g), Motor Size:, BL180 2,500Kv brushless outrunner, Radio:, 4 channel minimum, Trim Scheme Colors:, Black, Red, Silver, CG (center of gravity):, 19mm back from L.E. of bottom wing, Wing Loading:, 3.4 oz/sq ft (1.01 g/sq dm), Prop Size:, 5 x 2.75 inch, Recommended Battery:, 2S 7.4V 180mAh LiPo, Control Throw (Ailerons):, Control Throw (Elevator):, Control Throw (Rudder):, Approx. Flying Duration:, 5 minutes, Minimum Age Recommendation:, 14 years, Experience Level:, Intermediate, Recommended Environment:, Indoor/Outdoor, Is Assembly Required:, No,
Seize the UMX Beast 3D, Equipped with AS3X, and Control ...Hobby-Lobby
UMX BEAST 3D BNF BASIC WITH AS3X TECHNOLOGY
| Low | 70%, 0% expo; High |
| Low | 70%, 0% expo; High |
| Low | 70%, 0% expo; High |
UMX Beast 3D Highlights:, AS3X System for outstanding precision and 3D flight, Technical Specifications:, Wingspan:, 14.7 in (374mm), Overall Length:, 15.7 in (400mm), Wing Area:, 83.8 sq. in. (54.2 sq. dm.), Flying Weight:, 2.54 oz (72 g), Motor Size:, BL180 2,500Kv brushless outrunner, Radio:, 4 channel minimum, Trim Scheme Colors:, Black, Red, Silver, CG (center of gravity):, 19mm back from L.E. of bottom wing, Wing Loading:, 3.4 oz/sq ft (1.01 g/sq dm), Prop Size:, 5 x 2.75 inch, Recommended Battery:, 2S 7.4V 180mAh LiPo, Control Throw (Ailerons):, Control Throw (Elevator):, Control Throw (Rudder):, Approx. Flying Duration:, 5 minutes, Minimum Age Recommendation:, 14 years, Experience Level:, Intermediate, Recommended Environment:, Indoor/Outdoor, Is Assembly Required:, No,
Seize the UMX Beast 3D, Equipped with AS3X, and Control ...RCPlanet
TRAXXAS TRX PRO .15 SHORT CRANK TRA4004
| left to right | 31mm (1-1/4") |
| front to back | 11mm (7/16") |
, Width (cylinder head):, 41mm (1-1/2"), Mount holes (center to center):, Mount holes (center to center):, Overall Length (front end of shaft to back of engine):, 83mm (3.25"), Height (top of cylinder head to bottom of backplate):, 93mm (3-5/8"), Overall width of mounting ears (where the holes are):, 40mm (1-9/16"), Note:, Traxxas engines run much hotter than other engines (O.S., ASP, Thunder Tiger, etc) Because of their running temperature, Traxxas recommends using their Top Fuel (#TRAP5010) and their glow plug (#TRAG3230) to run the engine cooler., ,
This is the Traxxas TRX Short Crank Pro .15 Engine. ...RCPlanet
TEKIN RX8 BL 1/8 SYSTEM 4030 BL MOTOR 2D 2650KV TEKTT2310
, Motor, Weight:, 11.5oz(341g), Shaft Dimensions:, 19mm x 5mm w/flat, Motor Diameter:, 1.57"(40mm)/1.65"(42mm) including fin, Motor Length:, 2.80"(71mm), ESC, Controls:, Forward/Brake/Reverse, Input Voltage:, up to 6S Lipo, Continuous Current:, 210 Amps, BEC:, 6.0V/5.0A, Motor Limit Brushless Mode:, No Limit, Motor Limit Brushed Fwd Only Mode:, No Limit, Motor Limit Brushed Fwd/Rev Mode:, No Limit, Throttle Profiles:, 7 choices (on board), Brushed Modes:, Fwd Only, Fwd/Rev, Rev Delay, Brushless Modes:, Fwd Only, Fwd/Rev, Rev Delay, Dimensions:, 1.5" x 2.2" x 1.4", Weight Approx:, 2.7oz (76.5g), ,
Tekin is leading the industry not only in power handling ...